WinX DVD Copy Pro vs Competitors: Which DVD Copier Is Best?

How to Use WinX DVD Copy Pro to Clone and Burn DVDs Quickly

What this guide covers

• Quick steps to clone a DVD 1:1, create compressed copies, and burn a new disc.
• Recommended settings for speed and reliability.
• Troubleshooting tips for common issues.

Requirements

• A Windows PC with DVD drive(s).
• WinX DVD Copy Pro installed (latest version).
• Source DVD and blank writable DVD (DVD-R/DVD+R or DVD-RW/DVD+RW as supported).
• Sufficient free disk space if using temporary ISO or folder (4.7–8.5 GB depending on disc).

Fast 1:1 DVD clone (ideal when target is same size or dual-layer)

1. Insert the source DVD into your DVD-ROM drive.
2. Open WinX DVD Copy Pro.
3. Select the “Clone DVD to DVD” or “Clone DVD to Image” mode:
   • For direct disc-to-disc cloning, choose Clone DVD to DVD.
   • To create a backup file first, choose Clone DVD to ISO or Clone DVD to Folder.
4. Choose source drive (your DVD-ROM) and target drive (your DVD burner) or filename/location for ISO/folder.
5. Select Start (or Run). If burning directly, the program will read and then prompt to insert a blank disc in the burner.
6. Wait for the process to finish. Progress typically shows read, write, and verification phases.

Create a compressed copy (fit a dual-layer DVD to single-layer DVD)

1. Insert the source DVD and open the app.
2. Choose DVD to ISO or DVD to Folder to create a temporary image.
3. After image creation, select Burn and choose the compressed option if offered (or choose target DVD type DVD-5).
4. Confirm automatic compression settings (the app usually handles bitrate/resizing).
5. Start burning and wait for completion.

Burn an ISO or DVD folder to disc

1. With a blank writable DVD inserted, open WinX DVD Copy Pro.
2. Choose ISO to DVD or Folder to DVD.
3. Browse and select the ISO file or VIDEO_TS folder.
4. Select the correct target burner and set write speed:
   • Recommended: moderate speed (4x–8x) for better compatibility.
5. Click Start to burn and verify when prompted.

Recommended settings for speed and reliability

• Read/Write speed: Don’t choose maximum; use moderate speeds to reduce errors (4x–8x).
• Verify burned disc: Enable verification after burning to ensure integrity.
• Temporary files: Use local fast drive with enough free space when creating ISO/folder.
• Firmware and drivers: Ensure your DVD burner firmware and system drivers are up to date.

Troubleshooting common issues

• Read errors or read failure: Clean the source disc and try another drive; create an ISO first then burn from ISO.
• Burn failures: Try lower burn speed, use different brand blank discs, or replace the burner drive.
• Compatibility problems on older players: Use slower write speeds and finalize the disc (do not leave session open).
• Software crashes: Update WinX DVD Copy Pro to latest version and run as administrator.

Quick checklist (copy/paste)

• Source disc inserted and clean
• Blank disc compatible with burner
• WinX DVD Copy Pro latest version
• Sufficient free disk space for ISO/folder
• Moderate burn speed selected
• Verification enabled